0eea50f5a0
More generally, add support for platforms with atomics, which not really linked to architecture but compiler features. This may also help on some mips for example.
94 lines
3.4 KiB
Markdown
94 lines
3.4 KiB
Markdown
# External resources
|
|
|
|
You might want to follow one of these external resources to get an overview, but please still read carefully this page as some instructions may have evolved.
|
|
|
|
* [Kali Video Installation guide](https://youtu.be/t5eBPS6lV3E "Kali Linux Installation Tutorial")
|
|
* [Ubuntu Video Installation guide](https://youtu.be/DThmkH8CdMo "Ubuntu Installation Tutorial")
|
|
* [ParrotOS Video Installation guide](https://youtu.be/Wl9AsrU4igo "ParrotOS Installation Tutorial")
|
|
|
|
|
|
|
|
* ParrotOS: some further notes can be found at @5w0rdfish repo [Proxmark Installation for Parrot OS](https://github.com/5w0rdfish/Proxmark3-RDV4-ParrotOS)
|
|
* Iceman has also added this script to the fork. https://github.com/RfidResearchGroup/proxmark3/blob/master/install.sh
|
|
|
|
# Install the required dependencies
|
|
|
|
## On Debian / Ubuntu / Kali / ParrotOS / Raspbian
|
|
|
|
First what we want to do is get an update for the system. If you need to upgrade do this **before** the install. An upgrade was carried out prior to following these instructions.
|
|
|
|
Update the packages list
|
|
```sh
|
|
sudo apt-get update
|
|
```
|
|
Install the requirements
|
|
|
|
```sh
|
|
sudo apt-get install p7zip git ca-certificates build-essential libreadline5 libreadline-dev \
|
|
libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget libncurses5-dev gcc-arm-none-eabi libstdc++-arm-none-eabi-newlib
|
|
```
|
|
|
|
If you don't need the graphical components of the Proxmark3 client, you can skip the installation of `libqt4-dev`.
|
|
|
|
If you get some (non blocking) error at runtime such as _Gtk-Message: Failed to load module "canberra-gtk-module"_ you may have to install `libcanberra-gtk-module`.
|
|
|
|
## On ArchLinux
|
|
|
|
```sh
|
|
sudo pacman -Sy base-devel p7zip libusb readline ncurses arm-none-eabi-gcc arm-none-eabi-newlib git --needed
|
|
```
|
|
Additional AUR packages:
|
|
```sh
|
|
yaourt -S termcap
|
|
```
|
|
|
|
Note that with only these requirements, you will not get the graphical components of the Proxmark3 client. (Untested: how to get it? `yaourt -S qt4` ?)
|
|
|
|
# Clone the RRG/Iceman repository
|
|
|
|
```sh
|
|
git clone https://github.com/RfidResearchGroup/proxmark3.git
|
|
```
|
|
|
|
# Check ModemManager
|
|
|
|
**Very important**: make sure ModemManager will not interfer, otherwise it could brick your Proxmark3!
|
|
Read carefully [this page about ModemManager](ModemManager-Must-Be-Discarded.md) and follow its instructions.
|
|
|
|
# Check connection
|
|
|
|
Check the proxmark is being picked up by your computer. Plug it in, then:
|
|
|
|
```sh
|
|
sudo dmesg | grep -i usb
|
|
```
|
|
It should show up as a CDC device:
|
|
```
|
|
usb 2-1.2: Product: PM3
|
|
usb 2-1.2: Manufacturer: proxmark.org
|
|
cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device
|
|
```
|
|
And a new `/dev/ttyACM0` should have appeared.
|
|
|
|
# Get permissions to use /dev/ttyACM0
|
|
|
|
Add current user to the proper group to get permission to use `/dev/ttyACM0`.
|
|
|
|
This step can be done from the RRG/Iceman Proxmark3 repo with:
|
|
|
|
```sh
|
|
make accessrights
|
|
```
|
|
|
|
Then, you *need* to logout and login in again for your new group membership to be fully effective.
|
|
|
|
To test you have the proper read & write rights, plug the Proxmark3 and execute:
|
|
```sh
|
|
[ -r /dev/ttyACM0 ] && [ -w /dev/ttyACM0 ] && echo ok
|
|
```
|
|
It must return `ok`. Otherwise this means you've a permissions problem to fix.
|
|
|
|
# Compile and use the project
|
|
|
|
Now you're ready to follow the [compilation instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md).
|