AntiCat
61e4eac2b2
Legic: Moved card simulator into separate file & cleaned interface.
...
Reader and card simulation have almost no common code. Moreover the sim
uses an SSP Clock at 212kHz for all timings to prevent any drifting from
the PRNG. This clock speed is not available in reader simulation mode (SSP
runs at up to 3.4MHz, and changes speed between TX and RX). For these
reasons having the code in separate files makes it significantly cleaner.
2018-09-05 23:03:04 +02:00
Chris
f1d0e9db4d
fix: revert back
2018-08-29 19:42:46 +02:00
Chris
42e883f67b
FIX: print_result - now prints correct len.
...
FIX: DOWNLOAD_BUFFER - now with correct result logic
2018-08-28 21:15:28 +02:00
Chris
5f77121694
initial commit to be in sync the-soon-defunct repo pm3rdv40.
2018-08-12 21:54:31 +02:00
Chris
bacf8aff0f
add: FPC connector skeleton usart. Not working but if will be a starting point for those who might want to help out with it.
2018-07-30 09:54:44 +02:00
iceman1001
4d8488e14b
CHG: https://github.com/Proxmark/proxmark3/pull/631 from offical repo. (piwi)
...
CHG: textual adjustments
2018-07-28 14:25:12 +02:00
Chris
79158c7360
chg; preparing for more cmds.
2018-07-06 00:24:04 +02:00
Chris
36d774506c
chg: 'sm raw' - implemented 'r' don't read reply
2018-07-05 21:10:21 +02:00
Chris
fca841122f
chg: 'sc reader' - hooked up atr.
2018-07-05 16:32:10 +02:00
Chris
ee006c6a7b
add: sc upgrade - beta test
2018-07-05 14:38:31 +02:00
Chris
e7342e7402
chg: 'sc upgr' shouldnt print too much
2018-07-05 11:37:04 +02:00
Chris
f70b8be5de
add: 'sc' - smart card commad [rdv40]
...
chg: test to read out firmware
2018-07-05 10:48:24 +02:00
Chris
3ecff83de2
chg: clean up
2018-07-04 15:29:27 +02:00
Chris
9571cf1d13
chg: and wrap FPC code with defines..
2018-07-04 13:05:23 +02:00
Chris
e09f9cbb32
add: RDV40 smart card module comms ( Thanks to @Willok! ) bitbanging i2c with it
2018-07-04 12:19:04 +02:00
iceman1001
501c29f76d
add: support for reading flashmem
2018-05-22 12:09:17 +02:00
iceman1001
6b7819276d
add: 'mem info' - rudamentary support for new command.
2018-05-06 09:26:06 +02:00
iceman1001
4cd72b95c5
fix: coverty scan #277726 , unsigned value comparision always true.
2018-05-03 20:36:01 +02:00
iceman1001
989b80007c
chg: removed debugstatements
2018-05-03 16:20:46 +02:00
iceman1001
e50fef6607
fix: 'mem load' - wrong offset when uploading
2018-05-03 16:10:38 +02:00
iceman1001
021c0a1349
ADD: 'mem' commands. For RDV40 devices only.
...
If you don't have one, comment out inside client/Makefile this line
CFLAGS += -DWITH_FLASH
2018-05-03 12:15:03 +02:00
iceman1001
207fa2b574
add: potential fix for OSX uses, by @piwi
...
chg: adapting fix to support iceman forks extended commands.
2018-05-02 08:11:29 +02:00
iceman1001
98f0e9a284
fix: print.c on device doesn't have support for formatter %f
2018-04-27 12:16:35 +02:00
iceman1001
6ab1b285a0
chg.
2018-04-20 19:50:56 +02:00
iceman1001
f5718fb448
chg: wiping / reading / writing flashmem
2018-04-20 16:11:10 +02:00
iceman1001
a746699f5f
chg: reading / writing flashmem works better now.
2018-04-19 00:27:44 +02:00
iceman1001
42569a6f13
chg: adjusting for DEFINE usages.
2018-04-18 16:17:49 +02:00
iceman1001
0492df266c
chg: only print if compiled with smartcard flag
2018-04-18 12:41:03 +02:00
iceman1001
192aa9abd7
CHG: renamed iso7816 files
...
ADD: smartcard functionality (big thanks to Chris Nocker!)
2018-04-08 10:51:19 +02:00
iceman1001
3f5aab8f05
chg: preparing for iso7816 module statuses
2018-04-03 11:45:20 +02:00
iceman1001
3d956e686b
chg: flashmem adaptions
2018-03-31 10:35:40 +02:00
iceman1001
5690c0f5bc
chg: 'hw detectreader' - kind of useless previous change, measuring from two different readers, the max was 18.8v and 20.1v Not even close to 36v the standard ADC is configured
2018-03-15 10:48:57 +01:00
iceman1001
c3ba3f306f
chg: 'hw detectreader' - RDV40 adjustment
2018-03-15 09:25:22 +01:00
iceman1001
62814fd352
fix: 'hw detectreader' - adapted to PM3 RDV40 for HF measures.
2018-03-15 09:20:21 +01:00
iceman1001
7e0455aa0c
ADD: 'MattyRun' standalone - added the MattyRun standalone mode. *untested compilation*
2018-03-12 12:27:43 +01:00
iceman1001
802994d30a
add: 'hf 14 antifuzz' - the outline for the new functionality which fuzzes the anticollision phase ISO 14443a.
2018-02-28 13:21:47 +01:00
iceman1001
7b9ba2de8e
chg: standalone modes - adapted for HF_COLIN aswell, for easier compilation
2018-02-25 16:04:24 +01:00
iceman1001
35bdf6a58d
FIX: Accourding to errata, a SPI reset should be executed twice.
2018-02-17 17:35:54 +01:00
iceman1001
d0da96bf8a
remove warning "missleading-indentation"
...
flashmen spi 9bits?
2018-02-13 16:13:37 +01:00
iceman1001
1709c1ce1a
chg: flash_mem - hooked up client - device comms
2018-02-13 15:36:20 +01:00
iceman1001
85b2533435
chg: 'hw tune' device side should be unsigned and only 1024 (10b ADC)
2018-02-13 11:40:05 +01:00
iceman1001
5adb9af78f
chg: 'hw tune' - compensating the 3% error marginal.
2018-02-09 00:25:45 +01:00
iceman1001
094b5db9c5
fix: configure mux at startup
2018-02-07 17:21:51 +01:00
iceman1001
a2ac368fdb
fix.. wrong switch
2018-02-07 13:14:04 +01:00
iceman1001
75d04307a1
chg: adapting some HF voltage readings.
2018-02-07 13:11:10 +01:00
iceman1001
3d2fd2e3a1
FIX: start up,MUXSEL_HIPKD(PA19),MUXSEL_LOPKD(PA20) are floating state. Should adapt FPGA image aswell.
2018-02-07 12:08:50 +01:00
iceman1001
b39332e938
REM: 'hf 15 debug' removed command, unified with mf_debuglevel instead. The idea is to have ONE debug flag on deviceside.
2018-01-29 15:58:00 +01:00
iceman1001
c04ac4f9ac
ADD: 'hf felica reader' - added pm3 as FeliCa reader
...
ADD: raw commands - added the basis for sending RAW commands to FeliCa.
CHG: CRC16 rework, uses table based implementation. This will change more functions as I go on.
2018-01-29 13:42:02 +01:00
iceman1001
be82f9f018
DEL: 'hf mf sniff' - since it is very similar to 'hf 14a sniff' , I removed this command. The desired functionality will become a new 'hf list mf' option in the future.
2018-01-18 14:11:22 +01:00
iceman1001
5ea8f73547
FIX: cmd_send has wrong varible definitions, leading to loss of values.
2018-01-11 21:47:27 +01:00
