New bootrom

+ Add common area at end of RAM to communicate between main os and bootrom
+ Lower stack end to make room for common area
+ Implement CMD_DEVICE_INFO in both OS and bootrom to give information about the current state and supported features
+ Allow hands-free firmware update: When CMD_START_FLASH is received over USB in OS mode, the device will reset and enter the bootrom
  Pressing the button in hands-free update mode takes precedence: releasing the button will immediately abort firmware update and 
  perform a reset. Do not press the button.
+ Require each flash sequence to be preceded by a CMD_START_FLASH to set up the boundaries for the following flash sequence
  Not compatible with linux flasher before SVN revision 200
  Currently no compatible flasher for Windows. WINDOWS USERS: DO NOT UPDATE YOUR BOOTROM YET
+ Protect bootrom flash area unless magic unlock sequence is given in CMD_START_FLASH

bootrom/Makefile

@@ -5,6 +5,13 @@ ARMSRC = fromflash.c
 THUMBSRC = usb.c bootrom.c
 ASMSRC = ram-reset.s flash-reset.s
 
+## There is a strange bug with the linker: Sometimes it will not emit the glue to call
+## BootROM from ARM mode. The symbol is emitted, but the section will be filled with
+## zeroes. As a temporary workaround, do not use thumb for the phase 2 bootloader
+## -- Henryk Plötz <henryk@ploetzli.ch> 2009-09-01
+ARMSRC := $(ARMSRC) $(THUMBSRC)
+THUMBSRC := 
+
 # Do not move this inclusion before the definition of {THUMB,ASM,ARM}SRC
 include ../common/Makefile.common