Reorder client src directories

client/src/comms.h

@@ -0,0 +1,88 @@
+//-----------------------------------------------------------------------------
+// Copyright (C) 2009 Michael Gernoth <michael at gernoth.net>
+// Copyright (C) 2010 iZsh <izsh at fail0verflow.com>
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Code for communicating with the Proxmark3 hardware.
+//-----------------------------------------------------------------------------
+
+#ifndef COMMS_H_
+#define COMMS_H_
+
+#include "common.h"
+#include "pm3_cmd.h"    // Packet structs
+#include "util.h"       // FILE_PATH_SIZE
+
+#ifndef DropField
+#define DropField() { \
+        clearCommandBuffer(); SendCommandNG(CMD_HF_DROPFIELD, NULL, 0); \
+    }
+#endif
+
+#ifndef DropFieldEx
+#define DropFieldEx(x) { \
+        if ( (x) == ECC_CONTACTLESS) { \
+            DropField(); \
+        } \
+    }
+#endif
+
+//For storing command that are received from the device
+#ifndef CMD_BUFFER_SIZE
+#define CMD_BUFFER_SIZE 100
+#endif
+
+typedef enum {
+    BIG_BUF,
+    BIG_BUF_EML,
+    FLASH_MEM,
+    SIM_MEM,
+    SPIFFS,
+    FPGA_MEM,
+} DeviceMemType_t;
+
+
+typedef struct {
+    bool run; // If TRUE, continue running the uart_communication thread
+    bool block_after_ACK; // if true, block after receiving an ACK package
+    // Flags to tell where to add CRC on sent replies
+    bool send_with_crc_on_usb;
+    bool send_with_crc_on_fpc;
+    // "Session" flag, to tell via which interface next msgs are sent: USB or FPC USART
+    bool send_via_fpc_usart;
+    // To memorise baudrate
+    uint32_t uart_speed;
+    uint16_t last_command;
+    uint8_t serial_port_name[FILE_PATH_SIZE];
+} communication_arg_t;
+
+extern communication_arg_t conn;
+
+extern uint8_t gui_serial_port_name[FILE_PATH_SIZE];
+
+void *uart_receiver(void *targ);
+void SendCommandBL(uint64_t cmd, uint64_t arg0, uint64_t arg1, uint64_t arg2, void *data, size_t len);
+void SendCommandOLD(uint64_t cmd, uint64_t arg0, uint64_t arg1, uint64_t arg2, void *data, size_t len);
+void SendCommandNG(uint16_t cmd, uint8_t *data, size_t len);
+void SendCommandMIX(uint64_t cmd, uint64_t arg0, uint64_t arg1, uint64_t arg2, void *data, size_t len);
+void clearCommandBuffer(void);
+
+#define FLASHMODE_SPEED 460800
+bool IsCommunicationThreadDead(void);
+bool OpenProxmark(void *port, bool wait_for_port, int timeout, bool flash_mode, uint32_t speed);
+int TestProxmark(void);
+void CloseProxmark(void);
+
+bool WaitForResponseTimeoutW(uint32_t cmd, PacketResponseNG *response, size_t ms_timeout, bool show_warning);
+bool WaitForResponseTimeout(uint32_t cmd, PacketResponseNG *response, size_t ms_timeout);
+bool WaitForResponse(uint32_t cmd, PacketResponseNG *response);
+
+//bool GetFromDevice(DeviceMemType_t memtype, uint8_t *dest, uint32_t bytes, uint32_t start_index, PacketResponseNG *response, size_t ms_timeout, bool show_warning);
+bool GetFromDevice(DeviceMemType_t memtype, uint8_t *dest, uint32_t bytes, uint32_t start_index, uint8_t *data, uint32_t datalen, PacketResponseNG *response, size_t ms_timeout, bool show_warning);
+
+#endif
+
+