text

doc/md/Installation_Instructions/Troubleshooting.md

@@ -128,9 +128,9 @@ proxmark3 <YOUR_PORT_HERE> --flash --image /usr/local/share/proxmark3/firmware/f
 <>
 proxmark3 <YOUR_PORT_HERE> --flash --image /usr/share/proxmark3/firmware/fullimage.elf
 
-pm3 --> smart upgrade f /usr/local/share/proxmark3/firmware/sim011.bin
+pm3 --> smart upgrade -f /usr/local/share/proxmark3/firmware/sim011.bin
 <>
-pm3 --> smart upgrade f /usr/share/proxmark3/firmware/sim011.bin
+pm3 --> smart upgrade -f /usr/share/proxmark3/firmware/sim011.bin
 ```
 
 If you didn't install the PRoxmark but you're working from the sources directory and depending how you launch the client, your working directory might be the root of the repository:
@@ -153,9 +153,7 @@ client/proxmark3 <YOUR_PORT_HERE> --flash --image armsrc/obj/fullimage.elf
 <>
 ./proxmark3 <YOUR_PORT_HERE> --flash --image ../armsrc/obj/fullimage.elf
 
-pm3 --> smart upgrade f tools/simmodule/sim011.bin
-<>
-pm3 --> smart upgrade f ../tools/simmodule/sim011.bin
+pm3 --> smart upgrade -f sim011.bin
 ```
 
 etc.

doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md

@@ -54,26 +54,34 @@ Don't not turn off your device during the execution of this command!!
 Even its a quite fast command you should be warned.  You may brick it if you interrupt it.
 
 ```
-[usb] pm3 --> smart upgrade f /usr/local/share/proxmark3/firmware/sim011.bin
+[usb] pm3 --> smart upgrade -f /usr/local/share/proxmark3/firmware/sim011.bin
 # or if from local repo
-[usb] pm3 --> smart upgrade f tools/simmodule/sim011.bin
+[usb] pm3 --> smart upgrade -f sim011.bin
 ```
 
 You get the following output if the execution was successful:
 
 ```
-[!] WARNING - Smartcard socket firmware upgrade.
-[!] A dangerous command, do wrong and you will brick the smart card socket
-[+] Smartcard socket firmware uploading to PM3
-..
-[+] Smartcard socket firmware updating,  don't turn off your PM3!
-#db# FW 0000
-#db# FW 0080
-#db# FW 0100
-#db# FW 0180
-#db# FW 0200
-#db# FW 0280
-[+] Smartcard socket firmware upgraded successful        
+[=] -------------------------------------------------------------------
+[!] ⚠️  WARNING - sim module firmware upgrade
+[!] ⚠️  A dangerous command, do wrong and you could brick the sim module
+[=] -------------------------------------------------------------------
+
+[=] firmware file       sim011.bin
+[=] Checking integrity  sim011.sha512.txt
+[+] loaded 733 bytes from binary file sim011.bin
+[+] loaded 141 bytes from binary file sim011.sha512.txt
+[=] Don't turn off your PM3!
+[+] Sim module firmware uploading to PM3...
+ 🕑 733 bytes sent
+[+] Sim module firmware updating...
+[#] FW 0000
+[#] FW 0080
+[#] FW 0100
+[#] FW 0180
+[#] FW 0200
+[#] FW 0280
+[+] Sim module firmware upgrade successful    
 ```
 
 Run hw status command to verify that the upgrade went well.